ic6 BOLLARD Landscape Loudspeaker
The ic6 Bollard is our high-performance ic6 in-ceiling loudspeaker mounted in our paintable ic6 Bollard Housing (sold separately). The sleek and high-performing bollard provides 360-degrees of flawless, uniform sound – you no longer have to sacrifice sound quality outdoors.
The ic6 Bollard is available in a deep coffee brown finish and the housing is also paintable. 16-ohm or 70V/100V operation.
Purchase ic6 in-ceiling loudspeaker and ic6 Bollard Housing separately.

THE WORLD IS FLAT.
The ic6-BOLLARD projects linear, accurate and detailed sound in literally every direction. Don’t worry if you have to place them near a boundary – the reflected energy has the exact same flat and accurate frequency content as the direct energy and blends seamlessly into one, louder amazing, BIG AND OPEN, sound.
A PERFECT CIRCLE.
The ic6-BOLLARD’s horizontal coverage is literally a perfect circle.


VERTICALLY IN CONTROL.
The ic6-BOLLARD vertical polar response, plotted as a Polar Controur Map, reveals the vertical dispersion of the loudspeaker. Note that the FRONT of the speaker is plotted at 3 o’clock. The ic6-BOLLARD is designed to throw the sound out, far , and slightly up to the listeners ears.
BORING RED BOX.
The “Directivity Contour Plot” shows the speaker’s dispersion characteristics using colour to represent output magnitude. A quick inspection of the ic6-BOLLARD’s Directivity Contour Plot almost looks like a mistake. But it’s not. The 360° coverage is that uniform.


BORING RED…. CIRCLE.
Here is the data shown in the Directivity Contour Plot shown again on a polar map, making it easier to “see” how the sound is dispersed from the loudspeaker itself (as viewed from above the speaker looking straight down). A perfect circle, indeed.
SPECIFICATIONS
- Bandwidth: 68Hz -23kHz, -6dB; 54Hz – 25kHz, -10dB
- Coverage: 360 Degrees
- Sensitivity: 92dB (LF); 106dB (HF) SPL/2.83V/1m
- Power Handling: 100W (AES); 200W (Continuous); 400W (Peak)
- Minimum Recommended Power: 50W rms
- Maximum Output: 112dB SPL / 1m (based on AES power rating); 118dB SPL / 1m (peak)
- Nominal Impedance: 16-ohms; Hi-Z (70V/100V) Selectable
- Transformer Taps: 60W, 30W, 15W, (7.5W, 70V)
- Description: 6.5” High-output Weather Resistant Bollard Loudspeaker System
- Operation: Passive, Requires 1 Theory Loudspeaker Controller Amp Channel; 16-ohms or 70V/100V Operation, Selectable
- DSP Requirements: Requires Model-Specific Theory-Certified DSP Loudspeaker Processing
- Drivers: 1 x 6.5″ THEORY Coaxial Driver: 6.5” Carbon Fibre Low Frequency Driver; 1.4″ THEORY AdvancedPoly™ Compression Driver
- Enclosure: Molded Composite Frame with Powder Coated Stainless Steel Decorative Sleeve
- Terminals: Euroblock Connector with Parallel Output
- Outdoor Capability: Indoor and Outdoor Use
- Mounting: Solid Surface or Soil Mounting (with included threaded spikes)
- Colors: Dark Espresso
- Dimensions: Speaker (at top): 10.7″ DIAMETER (271 mm) x 32.3″ H (819 mm); Speaker (at base): 11.8″ DIAMETER (298mm) x 32.3″ H (819mm)
- Net Weight: 49.5 lbs. (22.45kg) Including ic6 Speaker; 37.0 lbs. (16.78kg) Bollard Housing Only
- Included Accessories: 12″ Stainless Steel Soil Spikes
- Optional Accessories: Burial Thrust Plates for Loose Soil Mounting




