An audiophile icon is born.
The Expert 1000 Pro combines two Expert 250 Pro units to create the ultimate Devialet system. With 1000W of power per channel in an exclusive casing, it is capable of driving the most demanding loudspeakers with a staggering authority and refinement.
Range
Exclusive technologies
ADH®, SAM®, RAM®, EVO®, DAC Magic Wire®
Streaming Services
UPnP
Airplay®
Spotify Connect
Roon Ready
Daisy chaining
Up to 8 units
Phono stage
Standard (MM / MC)
Pre-amplified output
Patented Magic Wire Digital / Analogue Converter, D/A T.I. PCM1792
Unique high-precision MasterClock with very low jitter: 2ps RMS
Conversion of all inputs into 24-bit/192 kHz
Built-in DSD / PCM conversion
Casing
Dark chrome | Hand polished casing carved out of a single aluminium block 100% pure copper bottom plate for optimal thermal dissipation
Side plating
Yes
Power Supply
Universal 90-240Vac – 50/60Hz
Power cable provided adapted to the country
Patented single stage switching mode topology
High power level: 600W continuous, 4000W peak
High output with power factor correction (PFC)
Dimension
Length: 400mm | Width: 400mm | Height: 40mm
Weight
Master : 9,7Kg Companion : 9,5Kg
Power
2×1000 Watts RMS under 6Ω
Distortion at full power
0.00025% THD+N
Distortion at full power
0,0001% (10W / 6Ω)
Distortion at 10w
0.0001% THD+N
Distortion at 10V
0,00025% THD+N
Signal-to-noise ratio
133dB
Output impedance
0.001Ω
Damping factor
8000
Bandwidth
DC-30kHz @ -0.1dB
DC-95kHz @ -3dB
Phase rotation
0.2° at 20kHz
0.9° at 40kHz
Thermal distorsion
Below measurement threshold
Wi-fi
2.4GHz / 5GHz 802.11ac, compatible with 802.11a/b/g/n
Ethernet
RJ45 100/1000 Mbps
USB
USB Audio 2.0 asynchronous input/output
Supported formats: 16-bit/44.1 kHz PCM to 32-bit/192 kHz PCM
DSD64 1bit/2.822400MHz and 1bit/3.072000MH
Special characteristics:
Very low latency
Digital coaxial inputs
Supported formats:16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM
DSD64 1bit/2.822400MHz and 1bit/3.072000MHz
Digital optical inputs
Supported formats: 16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM
Supported formats
Up to 32bits / 192kHz PCM (USB)
Up to 24bits / 192kHz PCM (AIR®, UPnP, Coaxial)
Up to 24bits / 96kHz PCM (Optical)
Up to 1bit / 3.072000MHz DSD64 (USB, Coaxial)
Analog inputs
Up to 4x RCA stereo
Sensitivity adjustable via the Configurator
Advanced phono stage (MM / MC)
Speaker output
4mm banana plugs, stripped cables or fork connectors
Adjustable from 30 WRMS to 1000 WRMS via the configurator
Compatible with all speakers, from 1Ω to 16Ω
Short-circuit protection
Active filtering available
Home automation
Up to 1x RS232 3.5mm 115200 bauds (documentation available via the Configurator)
Trigger
3.5mm mini-jack trigger connector
- 2 Expert 250 Pro
- 2 Expert Remote
- 1 Digital coaxial link cable for audio
- 1 Analog 3.5mm link cable for commands
- 2 User Manuals
- 2 Warranty booklets (5 years)
- 2 SD cards
- 2 Power cables
- 2 Pairs of gloves
- 2 Microfibre cloths
What’s the warranty on Expert Pro?
Expert Pro systems come with a 5-year warranty. Effective from date of purchase.
Why is the output power in dual-mono mode not always twice the output power of the stereo mode?
The ideal situation is to have no limitation in terms of thermal dissipation and current availability. This is the case with the 250 Pro where the output power in dual-mono is then 4 times higher than the output power in stereo (the output power P goes from 250W to 1000W as the output voltage U is multiplied by 2 in dual-mono and P=U2/R). With the 220 Pro, the casing is limiting the thermal dissipation in dual-mono mode and therefore the output power is only multiplied by 2. With the 140 Pro, the class D board is limiting the current availability and therefore the output power is only multiplied by 1.5.